Table of Contents
Advertisement
Memories (Reference Waveforms)
Memories are waveform traces stored for reference. They can be recalled
to the display for comparison with other traces, or they can be zoomed
and measured for better analysis of historical data. You can store up to
four internal memories (M1-M12). After that, new memories will overwrite
previously stored data.
Internal memories only persist until the oscilloscope is rebooted. To store
memories indefinitely, save them to an external file by choosing File >
Save Waveform. The file can then be recalled into one of the four internal
memories for viewing by choosing File > Recall Waveform. Only memory
files saved with the extension .trc can be recalled.
To recall a stored memory, press the front panel Mem(ory) button to
A
open the Memories dialog, then check On next to M1-M12.
A
To store a new memory, either:
A
B
A
B
A
Open the Mx tab behind the Memories dialog.
B
Select the trace you want stored in Copy From Waveform and
touch Copy Now.
C
Optionally add notes or labels to the stored waveform.
BASICS
Touch the Add New box and
A
choose Memory to turn on the
next memory trace.
Drag the descriptor box of the
B
trace you want stored onto the
Mx descriptor box.
OR
C
35
Advertisement
Table of Contents
