Configuring Route Table Entries And Route Preferences - Dell PowerConnect 8024 User Configuration Manual

Configuring Route Table Entries and Route Preferences

Beginning in Privileged EXEC mode, use the following commands to
configure IRDP settings.
Command
configure
ip route default
nextHopRtr preference
[
ip-addr
ip route
subnetmask
{ |
length nextHopRtr |
} {
} preference
null [
ip route distance
exit
894
Configuring IP Routing
Purpose
Enter global configuration mode.
Configure the default route.
]
nextHopRtr
•
preference
•
(administrative distance) of an individual static route.
(Range: 1-255)
Configure a static route. Use the keyword null instead of
prefix
the next hop router IP address to configure a static reject
route.
]
ip-address
•
subnet-mask
•
prefix-length
•
with a forward slash (/). (Range: 0-32 bits)
nextHopRtr
•
• null — Specifies that the route is a static reject route.
preference
•
(administrative distance) of an individual static route.
(Range: 1-255)
integer
Set the default distance (preference) for static routes.
Lower route preference values are preferred when
determining the best route.
Exit to Privileged EXEC mode.
— IP address of the next hop router.
— Specifies the preference value
— IP address of destination interface.
— Subnet mask of destination interface.
— Length of prefix. Must be preceded
— IP address of the next hop router.
— Specifies the preference value