Layer; Managing The Mac Address Table; Clear The Mac Address Table - Dell Force10 Z9000 Configuration Manual

Layer 2

Layer 2 features are supported on platforms:
This chapter describes the following Layer 2 features:
•

Managing the MAC Address Table

• MAC Learning Limit
• NIC Teaming
• Microsoft Clustering
• Configuring Redundant Pairs
• Restricting Layer 2 Flooding
Managing the MAC Address Table
FTOS provides the following management activities for the MAC address table:
•

Clear the MAC Address Table

• Set the Aging Time for Dynamic Entries
• Configure a Static MAC Address
• Display the MAC Address Table
Clear the MAC Address Table
You may clear the MAC address table of dynamic entries:
Task
Clear a MAC address table of dynamic entries.
address deletes the specified entry
•
all deletes all dynamic entries
•
interface deletes all entries for the specified
•
interface
vlan deletes all entries for the specified VLAN
•
e c s z
Command Syntax
clear mac-address-table {dynamic |
sticky} {address | all | interface | vlan}
24
Command Mode
EXEC Privilege
Layer 2 | 519