Dell Force10 Z9000 Configuration Manual page 893

To configure NTP authentication, use these commands in the following sequence in the
CONFIGURATION mode:
Step Command Syntax
ntp authenticate
1
ntp authentication-key number md5 key
2
ntp trusted-key number
3
To view the NTP configuration, use the
privilege mode. Figure 45-5
Figure 45-5. show running-config ntp Command Example
FTOS#show running ntp
!
ntp authenticate
ntp authentication-key 345 md5 5A60910F3D211F02
ntp server 11.1.1.1 version 3
ntp trusted-key 345
FTOS#
Command Mode
CONFIGURATION
CONFIGURATION
CONFIGURATION
show running-config ntp
shows an encrypted authentication key. All keys are encrypted.
Purpose
Enable NTP authentication.
Set an authentication key. Configure the
following parameters:
number: Range 1 to 4294967295. This
number must be the same as the number
in the ntp trusted-key command.
key: Enter a text string. This text string is
encrypted.
Define a trusted key. Configure a number
from 1 to 4294967295.
The number must be the same as the
number used in the ntp
authentication-key command.
command (Figure 40) in the EXEC
encrypted key
System Time and Date | 893