Important Frrp Points - Dell Force10 Z9000 Configuration Manual

Ftos configuration guide for z9000 system

Hide thumbs Also See for Force10 Z9000:

Table of Contents

In the example shown in

its own Control VLAN running on another ring. A Member VLAN that spans both rings is added as a

Member VLAN to both FRRP groups. Switch R3 has two instances of FRRP running on it: one for each

ring. The example topology that follows shows R3 assuming the role of a Transit node for both FRRP 101

and FRRP 202.

Figure 16-2. Example of Multiple Rings Connected by Single Switch

Important FRRP Points

FRRP provides a convergence time that can generally range between 150ms and 1500ms for Layer 2

networks. The master node originates a high-speed frame that circulates around the ring. This frame,

appropriately, sets up or breaks down the ring.

Ring Status Check Frames are transmitted by the Master Node at specified intervals

Force10 Resilient Ring Protocol (FRRP)

16-2, FRRP 101 is a ring with its own Control VLAN, and FRRP 202 has

Table of Contents