Standards Compliance; Ieee Compliance - Dell Force10 Z9000 Configuration Manual

Standards Compliance

This appendix contains the following sections:
•

IEEE Compliance

• RFC and I-D Compliance
• MIB Location
Note: Unless noted, when a standard cited here is listed as supported by FTOS, FTOS also supports
predecessor standards. One way to search for predecessor standards is to use the
website. Click on "Browse and search IETF documents", enter an RFC number, and inspect the top of
the resulting document for obsolescence citations to related RFCs.
IEEE Compliance
• 802.1AB — LLDP
• 802.1D — Bridging, STP
• 802.1p — L2 Prioritization
• 802.1Q — VLAN Tagging, Double VLAN Tagging, GVRP
• 802.1s — MSTP
• 802.1w — RSTP
• 802.1X — Network Access Control (Port Authentication)
• 802.3ab — Gigabit Ethernet (1000BASE-T)
• 802.3ac — Frame Extensions for VLAN Tagging
• 802.3ad — Link Aggregation with LACP
• 802.3ae — 10 Gigabit Ethernet (10GBASE-W, 10GBASE-X)
• 802.3af — Power over Ethernet
• 802.3ak — 10 Gigabit Ethernet (10GBASE-CX4)
• 802.3i — Ethernet (10BASE-T)
• 802.3u — Fast Ethernet (100BASE-FX, 100BASE-TX)
• 802.3x — Flow Control
• 802.3z — Gigabit Ethernet (1000BASE-X)
• ANSI/TIA-1057— LLDP-MED
• Force10 — FRRP (Force10 Redundant Ring Protocol)
50
http://tools.ietf.org/
Standards Compliance | 965