Log Messages In The Internal Buffer; Configuration Task List For System Log Management; Disable System Logging - Dell Force10 Z9000 Configuration Manual

Log Messages in the Internal Buffer

All error messages, except those beginning with %BOOTUP (Message), are log in the internal buffer.
Message 1 BootUp Events
%BOOTUP:RPM0:CP %PORTPIPE-INIT-SUCCESS: Portpipe 0 enabled

Configuration Task List for System Log Management

The following list includes the configuration tasks for system log management:
•

Disable System Logging

• Send System Messages to a Syslog Server
Disable System Logging
By default, logging is enabled and log messages are sent to the logging buffer, all terminal lines, console,
and syslog servers.
Enable and disable system logging using the following commands:
Task
Disable all logging except on the console.
Disable logging to the logging buffer.
Disable logging to terminal lines.
Disable console logging.
| Management
56
Command Syntax Command Mode
no logging on
CONFIGURATION
no logging buffer
CONFIGURATION
no logging monitor
CONFIGURATION
no logging console
CONFIGURATION