Configure A Default Route; Redistribute Routes - Dell Force10 Z9000 Configuration Manual

Redistribute routes

You can add routes from other routing instances or protocols to the OSPFv3 process. With the
command syntax, you can include RIP, static, or directly connected routes in the OSPF process.
Command Syntax
redistribute { bgp | connected |
static } [ metric
metric-value
metric-type
type-value
] [ tag
map-name tag-value

Configure a default route

Configure FTOS to generate a default external route into the OSPFv3 routing domain.
Command Syntax
default-information originate
[ always [ metric metric-value]
[ metric-type type-value]]
[ route-map map-name]
| Open Shortest Path First (OSPFv2 and OSPFv3)
656
Command Mode
CONF-IPV6-ROUTER-OSPF
|
] [ route-map
]
Command Mode
CONF-IPV6-ROUTER-OSPF
Usage
Specify which routes will be redistributed
into OSPF process. Configure the following
required and optional parameters:
• bgp, connected , or static : enter one of
the keyword to redistribute those routes.
metric
• metric-value range: 0 to
4294967295.
• metric-type
metric-type
external route type 1 OR 2 for OSPFv3
external route type 2.
• route-map map-name : enter a name of
a configured route map.
• tag range: 0 to 4294967295.
tag-value
Usage
Specify the information for the default route.
Configure the following required and
optional parameters:
always : indicate that default route
•
information must always be advertised
• metric range: 0 to
metric-value
4294967295.
• metric-type
metric-type
external route type 1 OR 2 for OSPFv3
external route type 2.
• route-map : enter a name of
map-name
a configured route map.
redistribute
: 1 for OSPFv3
: 1 for OSPFv3