File Transfer Services; Configuration Task List For File Transfer Services - Dell Force10 Z9000 Configuration Manual

To have FTOS include a timestamp with the syslog message, use the following command syntax in the
CONFIGURATION mode:
Command Syntax
service timestamps
localtime msec
[ ] [
To view the configuration, use the
To disable time stamping on syslog messages, enter

File Transfer Services

With FTOS, you can configure the system to transfer files over the network using File Transfer Protocol
(FTP). One FTP application is copying the system image files over an interface on to the system; however,
FTP is not supported on VLAN interfaces.
For more information on FTP, refer to

Configuration Task List for File Transfer Services

The following list includes the configuration tasks for file transfer services:
• Enable FTP server
• Configure FTP server parameters
• Configure FTP client parameters
For a complete listing of FTP related commands, refer to the
and Monitoring chapter.
| Management
62
log | debug ] datetime
[ [
show-timezone uptime
] [ ] |
(mandatory)
Command Mode
CONFIGURATION
]
show running-config logging
no service timestamps
RFC 959,
File Transfer Protocol
(optional)
(optional)
Purpose
Add timestamp to syslog messages. Specify
the following optional parameters:
datetime : You can add the keyword
•
localtime to include the localtime, msec,
and show-timezone . If you do not add the
keyword localtime , the time is UTC.
uptime . To view time since last boot.
•
If neither parameter is specified, FTOS
configures uptime .
command in the EXEC privilege mode.
log debug
[ |
.
FTOS Command Line Reference Guide
].
, Control