Ipv6 Routing - Dell Force10 Z9000 Configuration Manual

IPv6 Routing

IPv6 Routing is supported on platforms
Note: The IPv6 basic commands are supported on all platforms. However, not all features are supported
on all platforms, nor for all releases. See
features and platforms.
IPv6 (Internet Protocol Version 6) is the successor to IPv4. Due to the extremely rapid growth in internet
users and IP addresses, IPv4 is reaching its maximum usage. IPv6 will eventually replace IPv4 usage to
allow for the constant expansion.
This chapter provides a brief discussion of the differences between IPv4 and IPv6, and the Dell Force10
support of IPv6. This chapter discusses the following, but is not intended to be a comprehensive discussion
of IPv6.
• Protocol Overview
• Extended Address Space
• Stateless Autoconfiguration
• IPv6 Headers
• Implementing IPv6 with FTOS
• ICMPv6
• Path MTU Discovery
• IPv6 Neighbor Discovery
• QoS for IPv6
• IPv6 Multicast
• SSH over an IPv6 Transport
• Configuration Task List for IPv6
e c s z
Table 21-2 to determine the FTOS version supporting which
21
IPv6 Routing | 441