Conventions; Information Symbols - Dell Force10 Z9000 Configuration Manual

Conventions

This document uses the following conventions to describe command syntax:
Convention
keyword
parameter
{X}
[X]
x | y

Information Symbols

Table 1-1
Table 1-1. Information Symbols
Symbol
ces
e e
t x
*
Related Documents
For more information about the Dell Force10 E-Series, C-Series, S-Series and Z-Series refer to the
following documents:
• FTOS Command Reference
• Installing the System
• FTOS Release Notes
| About this Guide
28
Description
Keywords are in bold and should be entered in the CLI as listed.
Parameters are in italics and require a number or word to be entered in the CLI.
Keywords and parameters within braces must be entered in the CLI.
Keywords and parameters within brackets are optional.
Keywords and parameters separated by bar require you to choose one.
describes symbols contained in this guide.
Warning
Platform Specific
Feature
E-Series Specific
Feature/Command
S4810
Exception
Description
This symbol informs you of a feature that supported on one or two
e
platforms only: is for E-Series,
If a feature or command applies to only one of the E-Series platforms, a
separate symbol calls this to attention:
the ExaScale.
This symbol indicates that the selected feature is supported on the S4810 but not on
other S-Series systems.
This symbol is a note associated with some other text on the page that is
marked with an asterisk.
c s
is for C-Series, is for S-Series.
e
for the TeraScale or
t
e
for
x