Dell Force10 Z9000 Configuration Manual page 650

Use the
show running-config ospf
Command Syntax
show running-config ospf
Figure 29-19.
FTOS#show run ospf
!
router ospf 3
!
router ospf 4
router-id 4.4.4.4
network 4.4.4.0/28 area 1
!
router ospf 5
!
router ospf 6
!
router ospf 7
mib-binding
!
router ospf 8
!
router ospf 90
area 2 virtual-link 4.4.4.4
area 2 virtual-link 90.90.90.90 retransmit-interval 300
!
ipv6 router ospf 999
default-information originate always
router-id 10.10.10.10
Use the following commands in EXEC Privilege mode to get general route and links status information.
Command Syntax
show ip route summary
show ip ospf database
Use the following command in EXEC Privilege mode to view the OSPFv2 configuration for a neighboring
router:
Command Syntax
show ip ospf neighbor
| Open Shortest Path First (OSPFv2 and OSPFv3)
650
command to see the state of all the enabled OSPFv2 processes.
Command Mode
EXEC Privilege
Command Example: show running-config ospf
Command Mode
EXEC Privilege
EXEC Privilege
Command Mode
EXEC Privilege
Usage
View the summary of all OSPF process IDs enables on the
router.
Usage
View the summary information of the IP routes.
View the summary information for the OSPF database.
Usage
View the configuration of OSPF neighbors.