Windows 95/98/3.1X/Nt 4.0- Sending Data To The Document Server; Pcl 6/5E - Ricoh Aficio 650 Operating Instructions Manual

Windows 95/98/3.1x/NT 4.0- Sending Data
to the Document Server
The actual procedure differs depending on your printer driver. Check if your
printer driver is PCL or PostScript
Preparation
Make sure that the machine is connected to a computer, which has the printer
driver installed.
For more information on connecting to a computer or installing the printer
driver. ⇒ Refer to Printer Reference.
For the settings for the network, contact your network administrator.
Important
You should not specify more than one set of print with your application.
Make sure that the box for [Collate] is not checked before sending data to the
Document Server.

PCL 6/5e

You can send data from your computer to the Document Server using the PCL
6/5e printer driver.
Basic Procedure
Note
For further details, refer to the help file of your printer driver.
Follow these steps to send data to the Document Server.
A
Open the file you want to save in the Document Server.
B
Click [Print] from the [File] menu.
C
Click [Properties].
D
Click the [Setup] tab, and check the box for [Print to Document Server].
Note
If you want to send the data to the Document Server only this time, check
the box for [Clear after one job].
E
Click the [Document Server] tab, and specify your User ID. If necessary, spec-
ify a password and a file name.

Windows 95/98/3.1x/NT 4.0- Sending Data to the Document Server

®
, and follow one of the procedures below.
2
25