8.4
Establish an Ethernet connection between the processing unit and
8.4
PG / PC
8.4.1
Select the connection variant
8.4.1.1
Connection variants
You can connect the VS120 processing unit via a direct connection or via a network with a
PC / PG. In all cases, the TCP/IP Ethernet protocol is used for communication.
Direct connection
• Operating the VS120 processing unit as a DHCP server
• Connecting the VS120 processing unit manually
Connection over a network
• Integrating the VS120 processing unit as a DHCP client in a network
• Integrating the VS120 processing unit as a device in a PROFINET IO network
Next step
Select one of the connection variants from the next sections.
Vision Sensor SIMATIC VS120
Operating Instructions, Edition 02/2006, A5E00757507-01
8.4 Establish an Ethernet connection between the processing unit and PG / PC
Notice
Operating the VS120 processing unit in a network can interfere with the communication
in your network if you make certain settings in the Connect > Ports > Ethernet > IP Mode
menu. You should therefore only connect the VS120 processing unit to the network after
you have completed configuration and checked your settings carefully.
Commissioning
8-5