Static Local Configuration Of The Ip Dect Base Station - Avaya Communication Manager IP DECT Installation, Administration And Maintenance Manual

Static local configuration of the IP DECT base station

Static local configuration of the IP DECT base station
For static local configuration you must use the Java configuration tool: OpenMobility
Configurator (need Java Runtime Environment version 1.4 or higher).
The settings, which are configured on the IP DECT base station with the tool OM-Configurator,
will be saved permanently in the internal flash memory of a IP DECT base station.
The parameters configurable via the OM Configurator comply with the DHCP option, please see
section Avaya IP DECT system start up on page 23 for details.
If local static configuration has been done, DHCP is not used anymore.
The following figure shows the OM Configurator.
To configure a IP DECT base station, set at least the MAC adress and all mandatory options
(see table below). If the IP DECT base station has a IP adress use this adress in the IP DECT
base station Address field. In this case you can reach a IP DECT base station outside the local
LAN segment.
To set additional parameter, press add button and choose the parameter name.
Issue 1 August 2006 33