Table of Contents
Advertisement
4 Connecting to the PARTNER System
Direct Dial Connection
You can connect directly to the PARTNER system via modem in one of the
following ways:
• An intercom extension (Local Direct Dial)
• A dedicated outside line (Remote Direct Dial)
Direct Dial (Local) Connection
With the Direct Dial (Local) method, you dial an intercom extension via a modem.
To use this method, you must be at the same location as the PARTNER system.
This method has the following requirements:
• The PARTNER system must have either:
— an external modem that is connected to the Admin port of the
PARTNER R7.0 processor module, or
— a Remote Access card
• You must program your PARTNER system to enable your PC to place an
intercom call. (See
configure the line to which your PC is connected.)
To connect to the PARTNER system via an internal extension:
1 On the File menu, select Connect to PARTNER System.
The PC Administration Connection Options dialog box appears.
2 Click the Direct Dial option button, and then click the Next button.
3 Enter the intercom number for the external modem or Remote Access card
(extension 76), and then click the OK button.
4 When prompted, enter the Remote Administration Password, and then click
the OK button.
When the connection is completed, a message box appears.
5 Click the OK button.
30
Direct Dial Connection
"Making Intercom Calls from Your PC" on page 31
Getting Started
to
Hide quick links:
Advertisement
Table of Contents
