4.3.12.1 GVRP Configuration
This page allows you to configure the global GVRP configuration settings that are commonly applied to all GVRP enabled ports.
as well. as screen in
Figure 4-3-12-1
The page includes the following fields:
General Settings
Object
• Enable GVRP globally
GVRP protocol timers
• Join-time
• Leave-time
• LeaveAll-time
•
Max number of VLANs
User's Manual of GS-5220 PoE Series Managed Switch
appears.
Figure 4-3-12-1: GVRP Configuration Page Screenshot
Description
The GVRP feature is globally enabled by setting the check mark in the checkbox
named Enable GVRP and pressing the Save button.
Join-time is a value in the range of 1-20cs, i.e. in units of one hundredth of a
second.
The default value is 20cs.
Leave-time is a value in the range of 60-300cs, i.e. in units of one hundredth of a
second.
The default is 60cs.
LeaveAll-time is a value in the range of 1000-5000cs, i.e. in units of one
hundredth of a second.
The default is 1000cs
When GVRP is enabled, a maximum number of VLANs supported by GVRP is
specified. By default this number is 20. This number can only be changed when
GVRP is turned off.
236