Catpro Rgbhv+Stereo Rx Module Specifications - AMX Optima AVS-OP-1616-110 Instruction Manual

RGBHV+Stereo to CatPro Input/Output Boards

CatPro RGBHV+Stereo RX Module Specifications

Applies to: CatPro RX Module FG1010-48.
General Specifications
Approvals
Signal Types
Maximum Resolution
Supported Cable Types
Power In Connector
Power Consumption (max.)
Humidity
Operational Temperature
Dimensions
Depth
Width
Height
Weight
* When used in conjunction with an AMX AutoPatch Distribution Matrix, the overall cable length cannot exceed
1,000 feet (305 m).
Specifications at 1000 ft. – RGBHV+Stereo Audio
RGB Output Signal Level
RGB Impedance
RGB Signal to Noise Ratio (SNR)
RGB Skew Adjustment
Sync Output Signal Level
Sync Output Polarity
Audio Frequency Response
THD+Noise
Audio Signal to Noise Ratio
(SNR)
Audio Output Signal Level (max.)
Audio Output Impedance
Audio Output Volume
Adjustment Range
Connector Types
RGBHV+Stereo In
RGBHV Out
Stereo Audio Out
AMX reserves the right to modify its products and their specifications without notice.
142
CE, UL, cUL
RGBHV, stereo audio (audio is unbalanced)
1600x1200 (4:3) and 1920x1080p (16:9)
@ 60 Hz up to 1000 ft. (305 m)*
CAT-5, CAT-5e, CAT-6, CAT-6e, and STP
(skew-free cable is not recommended)
2.1 mm DC power jack
+12 V to +24 V DC @ 6 Watts
0 to 90% non-condensing
32° to 110° F (0° to 43° C)
5.22 in. (13.26 cm)
5.82 in. (14.78 cm)
1.42 in. (3.61 cm) w/out feet
Approx. 1.5 lb. (0.68 kg)
Parameter
20 Hz to 20 kHz
f = 1 kHz
Vin = -10 dBu to +4 dBu
20 Hz to 20 kHz
Vin = +4 dBu
Conditions
+0.75 V to -0.3 V typical
(terminated, user adjustable with gain &
peak)
75 ohms
>50 dB
0 to 62 ns in 2 ns increments on R, G, and B
channels (user adjustable)
Low = 0 V, High = +5 V (unterminated)
Active high or low
(output follows input polarity)
<±0.2 dB
<0.04%
>105 dB
+8 dBu
<5 ohms
Mute to +6 dB
(user adjustable with the RX Module)
RJ-45
HD-15
Pluggable 3-position terminal block
Value
Optima Instruction Manual