:PRINt
Command Syntax
:PRINt [<options>]
<options> ::= [<print option>][,..,<print option>]
<print option> ::= {COLor | GRAYscale | PRINter0 | PRINter1 | BMP8bit
The <print option> parameter may be repeated up to 5 times.
The PRINt command formats the output according to the currently
selected format (device). If an option is not specified, the value selected in
the Print Config menu is used.
See Also
•
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see
page
1138)
| BMP | PNG | NOFactors | FACTors}
"Introduction to Root (:) Commands"
"Introduction to :HARDcopy Commands"
":HARDcopy:FACTors"
":HARDcopy:GRAYscale"
":DISPlay:DATA"
on page 304
on page 190
on page 358
on page 361
on page 1063
6
Root (:) Commands
215