Memory Bank Setting - Icom IC-E80D Instruction Manual

Memory bank setting

The IC-E80D has a total of 26 banks (A to Z). Memory chan-
nels 0 to 999 are assigned to any desired bank for easy
memory management.
q Push and hold [S.MW](M/CALL) for 1 sec. to enter select
memory write mode.
• 1 short and 1 long beep sound.
• Memory channel number blinks.
w Rotate [DIAL] to select the desired memory channel.
e Push [ ](8) to select "BANK" setting.
• Bank group and channel number are displayed if the selected
memory channel has already been assigned to a bank.
[DIAL]
Push
MEMORY/CALL CHANNELS
r Rotate [DIAL] to select the desired bank group from "A" to "Z."
[DIAL]
t Push [ ](6) to select the bank channel digit, then rotate
[DIAL] to select the bank channel number from "00" to "99."
• Push [ ](4) to return to the bank group selection, if desired.
[DIAL]
y Push and hold [S.MW](M/CALL) for 1 sec. to assign the
channel to the bank.
• Return to the previous indication before entering select memory
write mode.
9
Rotate
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
95