Setting A Memory Bank - Icom i2730A Instruction Manual

■ Setting a Memory bank

The transceiver has a total of 10 banks (A to J).
You can assign regular Memory channels 0 to 999 to any
desired bank for easy memory management.
You can assign up to 100 channels to a bank.
It is convenient that you categorize the Memory bank, accord-
ing to the Memory channel category or your purpose.
You can use the Memory bank scan to scan the memory
channels in the selected bank. (p. 43)
• The operations are for the MAIN band.
NOTE: The memory banks are only used to hold memory
channels. Thus if the original memory channel content has
been changed, the memory bank content is also changed
at the same time.
For your reference:
To cancel your entry before assigning to or writing into
a Memory bank.
After entering, push [ Ω]D or [CLR]D.
q
• Displays the "CANCEL?."
w Rotate [DIAL] to select "YES."
S
ï]D.
Push [
e
MEMORY OPERATION
D Assigning a Memory channel to a Memory bank
Select the Memory channel to be assigned to a bank.
q
(p. 29)
Push [MW] C to display the Memory entry screen.
w
Rotate [DIAL] to select "EDIT."
e
S
ï]D.
Push [
r
Rotate [DIAL] to select "BANK."
t
S
ï]D.
Push [
y
Rotate [DIAL] to select a desired bank group, "A" to "J."
u
S
ï]D.
Push [
i
Rotate [DIAL] to select "WRITE."
o
S
!0 Push [ï]D.
• Displays "OVERW?."
!1 Rotate [DIAL] to select "YES."
S
!2 Push [ï]D.
• Beeps sound.
• Assigns the selected memory channel to the bank.
4
4
Select
32