Set Setup System - Qlogic SANbox 5800V Series Interface Manual

A

Set Setup System

Configures the network, logging, NTP server, and timer configurations on the
switch.
Authority
Admin session
Syntax
set setup system
dns
ipv4
ipv6
logging
ntp
timers
Keywords
dns
Prompts you in a line-by-line fashion to change DNS host name configuration
parameters described in
the keyword. For each parameter, enter a new value or press the Enter key to
accept the current value.
DNSClientEnabled
DNSLocalHostname
DNSServerDiscovery
DNSServer1Address
DNSServer2Address
DNSServer3Address
DNSSearchListDiscovery
DNSSearchList1
DNSSearchList2
DNSSearchList3
DNSSearchList4
DNSSearchList5
59263-02 A
Table
Table 14-31. DNS Host Name Configuration Parameters
Parameter
Enables (True) or disables (False) the DNS client.
Name of local DNS server
DNS server boot method: 1 – Static, 2 – DHCP,
IP addresses (version 4 or 6) of up to three DNS serv-
ers.
DNS search list discovery method:
A suffix that is appended to unqualified host names to
extend the DNS search. You can specify up to five
searchlists (or suffixes).
14-31. To configure all system parameters, omit
Description
3 – DHCP version 6. The default is 1 - Static.
Static
DHCP for IP version 4
DHCP for IP version 6
14 – Command Reference
Command Listing
14-123