Qlogic SANbox 5800V Series Interface Manual page 194

14 – Command Reference
Command Listing
delete [config_name]
Deletes the configuration given by [config_name] from the switch. You cannot
delete the default configuration (Default Config) nor the active configuration.
edit [config_name]
Opens an edit session for the configuration given by [config_name]. If you omit
[config_name], the currently active configuration is used.
export [account_name] [ip_address] [file_name]
Exports an existing backup configuration file (configdata) from the switch to a
remote server. The server IP address and corresponding user account are given
by [ip_address] and [account_name] respectively. [ip_address] can be an IP
address (version 4 or 6) or a DNS host name. The file name on the remote server
is given by [file_name]. The system will prompt for a password if the server
requires one.
import [account_name] [ip_address] [file_name]
Imports a backup configuration file given by [file_name] from a remote server to
the switch. The server IP address and corresponding user account are given by
[ip_address] and [account_name] respectively. [ip_address] can be an IP address
(version 4 or 6) or a DNS host name. The file name on the remote server is given
by [file_name]. The system will prompt for a password if the server requires one.
You must enter the Config Restore command to apply the configuration to the
switch.
list
Displays a list of all available configurations on the switch. This keyword does not
require an Admin session.
restore import
Restores configuration settings to an out-of-band switch from a backup file named
configdata, which must be first uploaded on the switch using FTP. You create the
backup file using the Config Backup command. Use FTP to load the backup file
on a switch, then enter the Config Restore command. After the restore is
complete, the switch automatically resets.
The optional Import keyword imports the backup file from a remote server
prompting you for an account name, server IP address or DNS host name,
configuration file name on the server, and a password if the server requires one.
When the upload is complete, the switch restores the configuration.
Refer to
14-14
"Backing Up and Restoring a Switch Configuration" on page
S
5-16.
59263-02 A