Qlogic SANbox 5800V Series Interface Manual page 349

A
PortWWN
PrimSeqErrors
RunningType
RxLinkResets
RxOfflineSeq
ShortFramesIn
SymbolicName
SyncStatus
TestFaultCode
TestStatus
TotalErrors
TotalLinkResets
TotalLIPsRecvd
TotalLIPsXmitd
TotalOfflineSeq
TotalRxFrames
TotalRxWords
TotalTxFrames
TotalTxWords
TxLinkResets
TxOfflineSeq
XmitterEnabled
59263-02 A
Table 14-40. Show Port Parameters (Continued)
Entry
Worldwide port name
Number of primitive sequence errors detected
Operational port type: F, FL, E, or Unknown
Number of link reset primitives received from an attached
device.
Number of offline sequences (OLSs) received. An OLS is
issued for link initialization, a Receive & Recognize
Not_Operational (NOS) state, or to enter the offline state.
Number of incidents when one or more frames that are less
than the minimum size were received
Port symbolic name
Synchronization status: SyncAcquired, SyncLost
Fault code from the most recent port test
Status from the most recent port test
Total number of errors detected on the port since the last port
or switch reset
Total number of link resets since the last port or switch reset
Number of loop initialization primitive frames received by this
port.
Number of loop initialization primitive frames transmitted by
this port.
Total number of Offline Sequences issued and received by this
port.
Total number of frames received by this port.
Total number of words received by this port.
Total number of frames issued by this port.
Total number of words issued by this port.
Number of Link Resets issued by this port.
Number of Offline Sequences issued by this port.
Transmitter status: True, False
14 – Command Reference
Command Listing
Description
14-169