Show Setup System - Qlogic SANbox 5800V Series Interface Manual

A

Show Setup System

Displays network, logging, NTP server, and timer parameters on the switch.
Authority
None
Syntax
show setup system
dns
ipv4
ipv6
logging
ntp
timers
Keywords
dns
Displays DNS host name configuration parameters. To display all system
configuration parameters, omit the keyword. Refer to
of the DNS host name configuration parameters.
ipv4
Displays switch IPv4 Ethernet configuration parameters. To display all system
configuration parameters, omit the keyword. Refer to
of the IPv4 Ethernet configuration parameters.
ipv6
Displays switch IP version 6 Ethernet configuration parameters. To display all
system configuration parameters, omit the keyword. Refer to
descriptions of the IP version 6 Ethernet configuration parameters.
logging
Displays event logging configuration parameters. To display all system
configuration parameters, omit the keyword. Refer to
of the event logging configuration parameters.
ntp
Displays NTP server configuration parameters. To display all system configuration
parameters, omit the keyword. Refer to
server configuration parameters.
timers
Displays timer configuration parameters. To display all system configuration
parameters, omit the keyword. Refer to
configuration parameters.
59263-02 A
14 – Command Reference
Table 14-31
Table 14-32
Table 14-34
Table 14-35 for descriptions of the NTP
Table 14-36 for descriptions of the timer
Command Listing
for descriptions
for descriptions
Table 14-33 for
for descriptions
14-177