Qlogic SANbox 5800V Series Interface Manual page 373

A
list
Displays SNMP version 3 user accounts, group, authentication type, and privacy
type. This keyword does not require an Admin session.
Examples
The following is an example of the Snmpv3user Add command:
SANbox #> admin start
SANbox (admin) #> snmpv3user add
A list of SNMPV3 user attributes with formatting and default values as
applicable will follow.
Enter a new value OR simply press the ENTER key where-ever allowed to
accept the default value.
If you wish to terminate this process before reaching the end of the list,
press "q" or "Q" and the ENTER OR "Ctrl-C" key to do so.
Username
Group
Authentication
AuthType
AuthPhrase
Confirm AuthPhrase
Privacy
PrivType
PrivPhrase
Confirm PrivPhrase
Do you want to save and activate this snmpv3user setup ?
SNMPV3 user added and activated.
The following is an example of the Snmpv3user Delete command:
SANbox #> admin start
SANbox (admin) #> snmpv3user delete snmpuser1
The user account will be deleted. Please confirm (y/n): [n] y
SNMPV3 user deleted.
The following is an example of the Snmpv3user List command:
SANbox #> snmpv3user list
Username
--------
snmpuser1
59263-02 A
(8-32 chars)
(0=ReadOnly, 1=ReadWrite) [ReadOnly
(True/False)
(1=MD5, 2=SHA)
(8-32 chars)
(True/False)
(1=DES)
(8-32 chars)
Group
-----
ReadWrite
14 – Command Reference
: snmpuser1
] : 1
[False ] : t
[MD5 ] : 1
: ***********
: ***********
[False ] : t
[DES ] : 1
: ********
: ********
(y/n): [n] y
AuthType PrivType
-------- --------
MD5 DES
Command Listing
14-193