Show Mem - Qlogic SANbox 5800V Series Interface Manual

A

Show Mem

Displays information about memory activity.
Authority
None
Syntax
show mem [count]
Keywords
[count]
The number of seconds for which to display memory information. If you omit
[count], the value 1 is used. Displayed memory values are in 1K block units.
NOTE:
This keyword will display memory activity updates until [count] is reached–it
cannot be interrupted. Therefore, avoid using large values for [count].
Examples
The following is an example of the Show Mem command:
SANbox #> show mem
procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----
r b
1 0
Filesystem space in use: 41138/53188 KB (77%)
59263-02 A
swpd free buff cache
0 334464 55932 18728
si so bi bo
0 0 1 0 401
14 – Command Reference
Command Listing
in cs us sy id wa
57 1 2 97 0
14-159