Table of Contents
Advertisement
0
Set Setup Command
Manages configuration settings for Remote Authentication Dial-In User Service
(RADIUS) servers, switch services, SNMP, and system configurations.
Authority
Admin session
Syntax
set setup
radius
services
snmp
system
Keywords
radius
Prompts you in a line-by-line fashion to configure RADIUS servers for user
account and device authentication.
configuration fields.
DeviceAuthOrder
UserAuthOrder
TotalServers
ServerIPAddress
ServerUDPPort
59042-08 A
Table B-23. RADIUS Service Settings
Entry
Authenticator priority for devices:
Local: Authenticate devices using only the local
security database. This is the default.
Radius: Authenticate devices using only the security
database on the RADIUS server.
RadiusLocal: Authenticate devices using the RADIUS
server security database first. If the RADIUS server is
unavailable, then use the local switch security
database.
Authenticator priority for user accounts:
Local: Authenticate users using only the local security
database. This is the default.
Radius: Authenticate users using only the security
database on the RADIUS server.
RadiusLocal: Authenticate users using the RADIUS
server security database first. If the RADIUS server is
unavailable, then use the local switch security
database.
Number of RADIUS servers to configure during this
session. Setting TotalServers to 0 disables all RADIUS
authentication. The default is 0.
IP address of the RADIUS server. The default is 10.0.0.1.
User Datagram Protocol (UDP) port number on the
RADIUS server. The default is 1812.
B – Command Line Interface
Table B-23
describes the RADIUS server
Description
Set Setup Command
B-77
Advertisement
Table of Contents
