Qlogic SANbox 5800V Series Interface Manual page 227

A
Protocol
SPI
Authentication
AuthenticationKey
Encryption
EncryptionKey
delete [association]
Deletes the specified association given by [association] from the Security
Association database. You must enter the Ipsec Save command afterwards to
save your changes.
edit [association]
Opens an edit session in which to change the configuration of an existing
association given by [association]. For descriptions of the association parameters,
refer to
AuthenticationKey and EncryptionKey values are masked.
59263-02 A
Table 14-6. Association Configuration Parameters
Parameter
Table 14-6. If the connection is not secure (SSH is disabled), the
Description
IP security protocol to be used to process data. The
protocol can be one of the following:
Encapsulated Security Payload–RFC 2406 (esp)
Encapsulated Security Payload–RFC 1827
(esp-old)
Authentication Header– RFC 2402 (ah)
Authentication Header–RFC 1826 (ah-old)
Security parameters index number
Algorithm to use to authenticate the source or desti-
nation. The authentication algorithm can be one of
the following:
HMAC-MD5
HMAC-SHA1
HMAC-SHA256
AES-XCBC-MAC
Key string to use for authentication.
Algorithm that encrypts outbound data or decrypt
inbound data. The encryption algorithm can be one
of the following:
DES-CBC
3DES-CBC
Key string to use in encrypting or decrypting data.
14 – Command Reference
Command Listing
14-47