Qlogic SANbox 5800V Series Interface Manual page 212

14 – Command Reference
Command Listing
Attribute
Member
CTAuthentication
Hash
Secret
copy [group_source] [group_destination]
Creates a new group named [group_destination] and copies the membership into
the new group from the group given by [group_source].
create [group] [type]
Creates a group with the name given by [group] with the type given by [type]. A
group name must begin with a letter and be no longer than 64 characters. Valid
characters are 0-9, A-Z, a-z, _, $, ^, and -. The security database supports a
maximum of 16 groups. If you omit [type], ISL is used. [type] can be one of the
following:
isl
Configures security for attachments to other switches.
Port
Configures security for attachments to N_Port devices.
ms
Configures security for attachments to N_Port devices that are issuing
management server commands.
delete [group]
Deletes the group given by [group].
14-32
Table 14-4. MS Group Member Attributes
Port worldwide name for the N_Port device that would attach to
the switch.
Common Transport (CT) authentication. Enables (True) or dis-
ables (False) authentication for MS group members. The default
is False.
The hash function to use to decipher the encrypted Secret sent
by the MS group member. Hash values are MD5 or SHA-1.
Hexadecimal string that is encrypted by the Hash function for
authentication with MS group members. The string has the fol-
lowing lengths depending on the Hash function:
MD5 hash: 16-byte
SHA-1 hash: 20-byte
Description
S
59263-02 A