Qlogic SANbox 5800V Series Interface Manual page 67

A
The following is an example of the
Table 14-22
SANbox #> admin start
SANbox (admin) #> config edit
SANbox (admin-config) #> set config switch
A list of attributes with formatting and default values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
AdminState
BroadcastEnabled
InbandEnabled
FDMIEnabled
FDMIEntries
DefaultDomainID
DomainIDLock
SymbolicName
R_A_TOV
E_D_TOV
PrincipalPriority
ConfigDescription
To make temporary changes to the switch administrative state, enter the
Set Switch State
59263-02 A
for a description of the switch configuration parameters.
(1=Online, 2=Offline, 3=Diagnostics)
(True / False)
(True / False)
(True / False)
(decimal value, 0-1000)
(decimal value, 1-239)
(True / False)
(string, max=32 chars)
(decimal value, 100-100000 msec)
(decimal value, 10-20000 msec)
(decimal value, 1-255)
(string, max=64 chars)
command.
Managing Switch Configurations
Set Config Switch command. Refer to
5 – Switch Configuration
[Online ]
[True ]
[True ]
[True ]
[1000 ]
[2 ]
[False ]
[SANbox ]
[10000 ]
[2000 ]
[254 ]
[Default Config]
5-15