Qlogic SANbox 5800V Series Interface Manual page 267

A
LinkSpeed
PortType
SymbolicPortName
ALFairness
(SFP ports only)
DeviceScanEnabled
ForceOfflineRSCN
ARB_FF
InteropCredit
59263-02 A
Table 14-19. Port Configuration Parameters (Continued)
Parameter
Transmission speed:
Port types:
Descriptive name for the port. The name can be up to 32
characters excluding #, semicolon (;), and comma (,). The
default is Port n, where n is the port number.
Arbitration loop fairness. Enables (True) or disables (False)
the switch's priority to arbitrate on the loop. The default is
False.
Enables (True) or disables (False) the scanning of the con-
nected device for FC-4 descriptor information during login.
The default is True.
Enables (False) or disables (True) the immediate transmis-
sion of RSCN messages when communication between a
port and a device is interrupted. If enabled, the RSCN mes-
sage is delayed for 200 ms for locally attached devices and
400 ms for devices connected through other switches. The
default is False. This parameter is ignored if IOStreamGuard
is enabled.
Send ARB_FF (True) instead of IDLEs (False) on the loop.
The default is False.
Interoperability credit. The number of buffer-to-buffer credits
per port. 0 means the default is unchanged. Default buf-
fer-to-buffer credits are 16 per port.
Changing interoperability credits is necessary only for
E_Ports that are connected to non-FC-SW-2-compliant
switches. Contact your authorized maintenance provider for
assistance in using this feature.
Description
SFP Ports: 1-Gbps, 2 Gbps, 4-Gbps, 8-Gbps, or Auto. The
default is Auto. 8-Gbps SFPs do not support the 1-Gbps
setting. Settting a port to 1-Gbps that has an 8-Gbps SFP
will down the port.
XPAK Ports: 10-Gbps, 20-Gbps, or Auto. The default is
Auto.
SFP Ports: GL, G, F, FL, Donor. The default is GL.
XPAK Ports: GL, G, F, FL, Donor. The default is GL.
14 – Command Reference
Command Listing
14-87