Qlogic SANbox 5800V Series Interface Manual page 388

14 – Command Reference
Command Listing
delete [zone]
Deletes the specified zone given by [zone] from the zoning database. If the zone
is a component of the active zone set, the zone will not be removed from the
active zone set until the active zone set is deactivated. You must enter the
Zoning Save
list
Displays a list of all zones and the zone sets of which they are components. This
keyword does not require an Admin session.
members [zone]
Displays all members of the zone given by [zone]. This keyword does not require
an Admin session.
orphans
Displays a list of zones that are not members of any zone set.
remove [zone] [member_list]
Removes the ports/devices given by [member_list] from the zone given by [zone].
Use a <space> to delimit aliases and ports/devices in [member_list].
[member_list] can have any of the following formats:
Domain ID and port number pair (Domain ID, Port Number). Domain IDs can
be 1–239; port numbers can be 0–255.
6-character hexadecimal device Fibre Channel address (hex)
16-character hexadecimal worldwide port name (WWPN) with the format
xx:xx:xx:xx:xx:xx:xx:xx.
Alias name
You must enter the
rename [zone_old] [zone_new]
Renames the zone given by [zone_old] to the zone given by [zone_new]. You
must enter the
zonesets [zone]
Displays all zone sets of which the zone given by [zone] is a component. This
keyword does not require an Admin session.
14-208
command afterwards to save your changes.
Zoning Save command afterwards to save your changes.
Zoning Save command afterwards to save your changes.
S
59263-02 A