Qlogic SANbox 5800V Series Interface Manual page 301

A
Examples
The following is an example of the Set Setup Snmp Common command:
SANbox (admin) #> set setup snmp common
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Current Values:
SnmpEnabled
Contact
Location
ReadCommunity
WriteCommunity
AuthFailureTrap
ProxyEnabled
SNMPv3Enabled
New Value (press ENTER to not specify value, 'q' to quit):
SnmpEnabled
Contact
Location
ReadCommunity
WriteCommunity
AuthFailureTrap
ProxyEnabled
SNMPv3Enabled
Do you want to save and activate this snmp setup? (y/n): [n]
59263-02 A
True
<sysContact undefined>
<sysLocation undefined>
public
private
False
True
False
(True / False)
(string, max=64 chars) :
(string, max=64 chars) :
(string, max=32 chars) :
(string, max=32 chars) :
(True / False)
(True / False)
(True / False)
14 – Command Reference
:
:
:
:
Command Listing
14-121