Syntax And Keywords; Notes And Examples; Command Listing - Qlogic SANbox 5800V Series Interface Manual

14 – Command Reference

Syntax and Keywords

Commands that modify the Internet Protocol Security configuration require
an Ipsec Edit session, which is opened by the Ipsec Edit command. These
commands include the Ipsec,
commands.
Syntax and Keywords
The Syntax paragraph defines the command syntax using the following
convention:
command
keyword
keyword [value]
keyword [value1] [value2]
The Command is followed by one or more keywords. Consider the following rules
and conventions:
Commands and keywords are case insensitive.
Required keyword values appear in standard font: [value]. Optional values
are shown in italics: [value].
Underlined portions of the keyword in the command format indicate the
abbreviated form that can be used. For example, the delete keyword can be
abbreviated del.
The Keywords paragraph lists and describes each keyword and any applicable
values.

Notes and Examples

The Notes paragraph presents useful information about the command and its
use, including special applications or effects on other commands. The Examples
paragraph presents sample screen captures of the command and its output.

Command Listing

The commands are listed in alphabetical order.
14-2
Ipsec Association and
S
Ipsec Policy
59263-02 A