Test Status - Qlogic SANbox 5800V Series Interface Manual

14 – Command Reference
Command Listing

Test Status

Displays the status of a test in progress, or if there is no test in progress, the
status of the last test that was executed.
Authority
None
Syntax
test status
port [port_number]
switch
Keywords
port [port_number]
Display test status for the port given by [port_number]. [port_number] can be
0–23.
switch
Display test status for the switch: Passed, Failed, NeverRun.
Examples
The following is an example of the Test Status Port command:
SANbox (admin) #> test status port 1
Port
Num
----
1
14-198
Test
Port Type
-------- ----
1 Offline Internal
Test Loop
Status Count
------ -----
Passed
S
Test
Failures
--------
12 0
59263-02 A