Qlogic SANbox 5800V Series Interface Manual page 215

A
Examples
The following is an example of the Group Add command:
SANbox #> admin start
SANbox (admin) #> security edit
SANbox (admin-security) #> group add Group_1
A list of attributes with formatting and default values will follow
Enter a new value or simply press the ENTER key to accept the current value
with exception of the Group Member WWN field which is mandatory.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Group Name Group_1
Group Type ISL
Member (WWN)
Authentication (None / Chap)
PrimaryHash (MD5 / SHA-1)
PrimarySecret (32 hex or 16 ASCII char value)
SecondaryHash (MD5 / SHA-1 / None)
SecondarySecret (40 hex or 20 ASCII char value)
Binding (domain ID 1-239, 0=None)
Finished configuring attributes.
To discard this configuration use the security cancel command.
The following is an example of the Group Edit command:
SANbox #> admin start
SANbox (admin) #> security edit
SANbox (admin-security) #> group edit G1 10:00:00:c0:dd:00:90:a3
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Group Name
Group Type
Group Member
Authentication
PrimaryHash
PrimarySecret
SecondaryHash
SecondarySecret
Binding
Finished configuring attributes.
To discard this configuration use the security cancel command.
59263-02 A
[00:00:00:00:00:00:00:00] 10:00:00:c0:dd:00:90:a3
[None
[MD5
[
[None
[
[0
g1
ISL
10:00:00:c0:dd:00:90:a3
(None / Chap)
(MD5 / SHA-1)
(40 hex or 20 ASCII char value) [
(MD5 / SHA-1 / None)
(32 hex or 16 ASCII char value) [
(domain ID 1-239, 0=None)
14 – Command Reference
Command Listing
] chap
]
] 0123456789abcdef
]
]
]
[None] chap
[MD5 ] sha-1
] 12345678901234567890
[None] md5
] 1234567890123456
[3 ]
14-35