Set Setup Callhome - Qlogic SANbox 5800V Series Interface Manual

A

Set Setup Callhome

Configures the Call Home database for managing e-mail notifications of fabric
problems.
Authority
Admin session
Syntax
set setup callhome
Prompts you in a line-by-line fashion to configure the Call Home database.
Table 14-26
PrimarySMTPServerAddr
PrimarySMTPServerPort
PrimarySMTPServerEnabled
SecondarySMTPServerAddr
SecondarySMTPServerPort
SecondarySMTPServerEnabled
ContactEmailAddress
PhoneNumber
StreetAddress
59263-02 A
describes the Call Home configuration fields.
Table 14-25. Call Home Service Configuration Settings
Entry Description
IP address (version 4 or 6) or DNS host name of
the primary SMTP server. The default is 0.0.0.0.
Service port number that the primary SMTP
server is monitoring for SMTP agents. The default
is 25.
Enables (True) or disables (False) the primary
SMTP server. The default is False.
IP address (version 4 or 6) or DNS host name of
the secondary SMTP server. The default is
0.0.0.0.
Service port number that the secondary SMTP
server is monitoring for SMTP agents. The default
is 25.
Enable (True) or disable (False) the secondary
SMTP server. The default is False.
E-mail address of the person to be notified to
respond to the e-mail message. The format is
account@domain. This information is included in
the e-mail message when the profile format is
FullText.
Contact phone number to be included in the
e-mail message text. This information is included
in the e-mail message when the profile format is
FullText.
Contact street address to be included in the e-mail
message text. This information is included in the
e-mail message when the profile format is Full-
Text.
14 – Command Reference
Command Listing
14-109