Show Steering - Qlogic SANbox 5800V Series Interface Manual

14 – Command Reference
Command Listing

Show Steering

Displays the routes that data takes in the fabric.
Authority
None
Syntax
show steering [domain_id]
Keywords
[domain_id]
The domain ID for which to display route information. If you omit [domain_id], the
system displays routes for all switches in the fabric.
Examples
The following is an example of the Show Steering command:
SANbox #> show steering 35
DomainID
--------
35
14-180
DefaultOutPort InPort OutPort
-------------- ------ -------
18 3
5
6
7
15
16/18/16/18
18/16/18/16
16/18/16/18
16/18/16/18
18/16/18/16
S
59263-02 A