Qlogic SANbox 5800V Series Interface Manual page 192

14 – Command Reference
Command Listing
The following is an example of the Capture Remove command:
SANbox #> admin start
SANbox (admin) #> callhome edit
SANbox (admin-callhome) #> capture remove
Capture Entries for Profile:
Index
-----
1
Please select a capture entry from the list above ('q' to quit): 1
The selected capture entry has been removed from profile Tech_Support_Center.
This configuration must be saved with the 'callhome save' command
before it can take effect, or to discard this configuration
use the 'callhome cancel' command.
14-12
Tech_Support_Center
TimeOfDay DayOfWeek
--------- ---------
02:00 Sat
Interval
--------
1 (weeks)
S
59263-02 A