Qlogic SANbox 5800V Series Interface Manual page 269

A
IOStreamGuard
PDISCPingEnable
(SFP ports only)
59263-02 A
Table 14-19. Port Configuration Parameters (Continued)
Parameter
Enables or disables the suppression of RSCN messages.
IOStreamGuard can have the following values:
Enables (True) or disables (False) the transmission of ping
messages from the switch to all devices on a loop port. The
default is True.
Description
Enable – Suppresses the reception of RSCN messages
from other ports for which IOStreamGuard is enabled.
Disable – Allows free transmission and reception of RSCN
messages.
Auto – Suppresses the reception of RSCN messages
when the port is connected to an initiator device with a
QLogic HBA. For older QLogic HBAs, such as the
QLA2200, the DeviceScanEnabled parameter must also
be enabled. The default is Auto.
14 – Command Reference
Command Listing
14-89