Capture - Qlogic SANbox 5800V Series Interface Manual

14 – Command Reference
Command Listing

Capture

Manages the data capture configuration for the Tech_Support_Center Call Home
profile. The data capture configuration determines the time and frequency by
which status and trend data is collected from the switch and sent to recipients
specified in the Tech_Support_Center profile.
Authority
Admin session and a Callhome Edit session. Refer to the
on page 14-6
Syntax
capture
add
edit
remove
Keywords
add
Adds data capture instructions to the Tech_Support_Center profile.
describes the data capture parameters.
Parameters
TimeOfDay
DayOfWeek
Interval
edit
Opens an edit session in which to modify the data capture configuration of the
Tech_Support_Center profile. Refer to
capture configuration parameters.
remove
Removes the data capture configuration from the Test_Support_Center profile.
14-10
for information about starting a Callhome Edit session.
Table 14-1. Data Capture Configuration Parameters
Time of day to send status and trend data to the
Tech_Support_Center profile e-mail recipients. The format is
hh:mm on a 24-hour clock. The default 02:00.
Day-of-the-week to send status and trend data to the
Tech_Support_Center profile e-mail recipients. Values can be Sun,
Mon, Tue, Wed, Thur, Fri, Sat. The default is Sat.
Number of weeks between capture data e-mails to the
Tech_Support_Center profile e-mail recipients. Values can be
1–26. The default is 1.
"Callhome" command
Description
Table 14-1 for a description of the data
S
Table 14-1
59263-02 A