Qlogic SANbox 5800V Series Interface Manual page 242

14 – Command Reference
Command Listing
Parameter
Format
MaxSize
EmailSubject
RecipientMail
CaptureEnabled
delete [profile]
Deletes the specified profile given by [profile] from the Call Home database. You
must enter the
edit [profile]
Opens an edit session in which to change the configuration of an existing profile
given by [profile]. The Tech_Support_Center profile can be edited. For
descriptions of the profile parameters, refer to
parameter is displayed only when modifying the Tech_Support_Center profile.
rename [profile_old] [profile_new]
Renames the profile given by [profile_old] to the profile given by [profile_new]. You
must enter the
14-62
Table 14-8. Profile Configuration Parameters (Continued)
Level of detail to be included in the e-mail message:
ShortText–includes switch and event information.
FullText–includes switch information, event information, Call
Home contact information, and SNMP contact information.
Tsc1–includes switch and event information in a format
intended for automated e-mail readers.
Maximum number of characters allowed in the e-mail message.
Decreasing this parameter makes for easier reading on small dis-
play devices such as cell phones. The minimum is 650. The max-
imum and default is 100,000.
E-mail subject of up to 64 characters
Recipient e-mail addresses; maximum of 10 addresses. The for-
mat is account@domain.
Enables (True) or disables (False) the data capture configuration
only when creating the Tech_Support_Center profile. For more
information about the data capture configuration, refer to the
Capture command.
Callhome Save command afterwards to save your changes.
Callhome Save command afterwards to save your changes.
Description
Table 14-8. The CaptureEnabled
S
59263-02 A