Qlogic SANbox 5800V Series Interface Manual page 191

A
Examples
The following is an example of the Capture Add command:
SANbox #> admin start
SANbox (admin) #> callhome edit
SANbox (admin-callhome) #> capture add
A list of attributes with formatting and default values will follow.
Enter a value or simply press the ENTER key to accept the default value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Value (press ENTER to accept the default, 'q' to quit):
TimeOfDay
DayOfWeek
Interval
A capture entry has been added to profile Tech_Support_Center.
This configuration must be saved with the 'callhome save' command
before it can take effect, or to discard this configuration
use the 'callhome cancel' command.
The following is an example of the Capture Edit command:
SANbox #> admin start
SANbox (admin) #> callhome edit
SANbox (admin-callhome) #> capture edit
Capture Entries for Profile:
Index
-----
1
Please select a capture entry from the list above ('q' to quit): 1
A list of attributes with formatting and current values will follow.
Enter a value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Value (press ENTER to accept the default, 'q' to quit):
TimeOfDay
DayOfWeek
Interval
The selected capture entry has been edited for profile Tech_Support_Center.
This configuration must be saved with the 'callhome save' command
before it can take effect, or to discard this configuration
use the 'callhome cancel' command.
59263-02 A
(HH:MM)
(Sun,Mon,Tue,Wed,Thu,Fri,Sat)
(decimal value, 1-26 weeks)
Tech_Support_Center
TimeOfDay DayOfWeek
--------- ---------
02:00 Sat
(HH:MM)
(Sun,Mon,Tue,Wed,Thu,Fri,Sat)
(decimal value, 1-26 weeks)
[02:00]
[Sat ]
[1 ]
Interval
--------
1 (weeks)
[02:00]
[Sat ]
[1 ]
14 – Command Reference
Command Listing
14-11