Set Timezone - Qlogic SANbox 5800V Series Interface Manual

14 – Command Reference
Command Listing

Set Timezone

Specifies the time zone for the switch and the workstation. The default is Universal
Time (UTC) also known as Greenwich Mean Time (GMT). This keyword prompts
you to choose a region, then a subregion to specify the time zone. Changing the
time zone converts the currently displayed time to the time in the new time zone.
Authority
Admin session
Syntax
set timezone
Examples
The following is an example of the Set Timezone command:
SANbox #> admin start
SANbox (admin) #> set timezone
Africa
Antarctica
Atlantic
Europe
Pacific
America/Grenada
America/Guatemala
America/Guyana
America/Havana
America/Indiana
.
.
.
America/Monterrey
America/Montreal
America/Nassau
America/Nipigon
America/Noronha
America/Panama
q
Enter selection (or 'q' to quit): america/north_dakota
America/North_Dakota/Center
Enter selection (or 'q' to quit): america/north_dakota/center
14-132
Press ENTER for more options or 'q' to make a selection.
Press ENTER for more options or 'q' to make a selection.
America
Asia
Australia
Indian
UTC
America/Guadeloupe
America/Guayaquil
America/Halifax
America/Hermosillo
America/Indianapolis
America/Montevideo
America/Montserrat
America/New_York
America/Nome
America/North_Dakota
America/Pangnirtung
S
59263-02 A