Print Head Cleaning; Cleaning The Print Head Using The Product Control Panel - Epson WorkForce Pro WF-M5399 User Manual

Print Head Cleaning

If print quality has declined and the nozzle check pattern indicates clogged nozzles, you can clean the
print head.
Note: You cannot clean the print head if ink is expended, and may not be able to clean it when ink is low.
You must replace the ink pack first.

Cleaning the Print Head Using the Product Control Panel

Cleaning the Print Head Using a Computer Utility
Parent topic:
Cleaning the Print Head Using the Product Control Panel
You can clean the print head using the control panel on your product.
1. Make sure there are no errors on the LCD screen.
2. Load a few sheets of plain paper in the product.
3. Press the
4. Use the arrow buttons to select Maintenance and press the OK button.
5. Press the down arrow button, select Print Head Cleaning and press the OK button.
6. Select Start and press the OK button to clean the print head.
When the cleaning cycle is finished, a nozzle check pattern is printed.
Caution: Never turn off the product or open the front cover during a cleaning cycle or you may not
be able to print.
Print Head Maintenance
home button, if necessary.
163