Installation Direction And Clearances - Mitsubishi Electric MR-J2S-CP Instruction Manual

2. INSTALLATION

2.2 Installation direction and clearances

CAUTION
(1) Installation of one servo amplifier
Control box
40mm
(1.6 in.)
or more
Servo amplifier
10mm
(0.4 in.)
or more
Do not hold the front cover to transport the servo amplifier. The servo amplifier
may drop.
The equipment must be installed in the specified direction. Otherwise, a fault may
occur.
Leave specified clearances between the servo amplifier and control box inside
walls or other equipment.
10mm
(0.4 in.)
or more
40mm
(1.6 in.)
or more
Control box
Wiring clearance
70mm
(2.8 in.)
2 - 2
Up
Down