Removal And Reinstallation Of The - Mitsubishi Electric MR-J2S-CP Instruction Manual

1. FUNCTIONS AND CONFIGURATION
1.6.2 Removal and reinstallation of the front cover
WARNING
(1) For MR-J2S-200CP or more
Removal of the front cover
1)
2)
Front cover
1) Hold down the removing knob.
2) Pull the front cover toward you.
(2) For MR-J2S-500CP
Removal of the front cover
1)
2)
Front cover
1) Hold down the removing knob.
2) Pull the front cover toward you.
Before removing or installing the front cover, turn off the power and wait for 15
minutes or more until the charge lamp turns off. Then, confirm that the voltage
between P and N is safe with a voltage tester and others. Otherwise, an electric
shock may occur. In addition, always confirm from the front of the servo amplifier
whether the charge lamp is off or not.
Reinstallation of the front cover
Front cover hook
(2 places)
2)
1) Insert the front cover hooks into the front cover sockets of
the servo amplifier.
2) Press the front cover against the servo amplifier until the
removing knob clicks.
Reinstallation of the front cover
Front cover hook
(2 places)
2)
1) Insert the front cover hooks into the front cover sockets of
the servo amplifier.
2) Press the front cover against the servo amplifier until the
removing knob clicks.
1 - 19
1)
Front cover socket
(2 places)
1)
Front cover socket
(2 places)