Mitsubishi Electric MR-J2S-CP Instruction Manual page 90

3. SIGNALS AND WIRING
Use of a flat-blade torque screwdriver is recommended to manage the screw tightening torque. The
following table indicates the recommended products of the torque screwdriver for tightening torque
management and the flat-blade bit for torque screwdriver. When managing torque with a Phillips bit,
please consult us.
Torque screwdriver
Bit for torque screwdriver
To loosen. To tighten.
Control circuit terminal block
Product
Flat-blade screwdriver
Tip thickness 0.4 to 0.6mm (0.016 to 0.024in.)
Overall width 2.5 to 3.5mm (0.098 to 0.138in.)
Cable
Opening
Model
N6L TDK
B-30, flat-blade, H3.5 X 73L
3 - 41
Manufacturer/Representative
Nakamura Seisakusho
Shiro Sangyo