Mitsubishi Electric MR-J2S-CP Instruction Manual page 267

14. OPTIONS AND AUXILIARY EQUIPMENT
(2) Brake unit parameter setting
Normally, when using the FR-BU2, changing parameters is not necessary. Whether a parameter can
be changed or not is listed below.
Parameter
No. Name
0 Brake mode switchover
1 Monitor display data selection
2 Input terminal function selection 1
3 Input terminal function selection 2
77 Parameter write selection
78 Cumulative energization time
carrying-over times
CLr Parameter clear
ECL Alarm history clear
C1 For manufacturer setting
Change
possible/
impossible
Impossible
Possible
Impossible
14 - 10
Remarks
Do not change the parameter.
Refer to the FR-BU2-(H) Brake Unit
Instruction Manual.
Do not change the parameter.